|
|
|
SAINT GOBAIN ABRASIVES CARBORUNDUM & NORTON ABRASIVES POLY PTX POLISHING SYSTEMS SHINANO INDUSTRIAL AIR TOOLS SWISS ABRASIVES ( SIA ). SUHNER. KINIK. VSM. PFERD. CUSTOM BUILT GRINDING WHEELS SANDING & LINISHING BELTS ROLLS - SHEETS - NON WOVEN ABRASIVES METAL POLISHING EQUIPMENT & POLISHES ARBOGA & SCANTOOL LINISHING MACHINES MANUFACTURERS OF HANDEEZ INDUSTRIAL SCOURING PADS EZELAP LAPPING COMPOUNDS EZEGRIND VALVE GRINDING COMPOUNDS RED-I-BUFF METAL SANITISING WHEELS RED-I-BUFF PROFILE SANDING WHEELS RED-I-BUFF POLISHING BUFFS & MOPS FLOGGER LOADINGS SPIRAL BANDS
|
POLISHING WHEELS THE PRACTICAL ECONOMICAL ALTERNATIVE TO GRIT MOPS NO SET UP TIME - READY TO GO IMMEDIATELY ECONOMICAL NO MORE WASTED TIME, APPLYING GLUE AND GRIT TO MOPS QUICK CHANGE FROM GRIT TO GRIT
POLISHING WHEELS ARE VERY DURABLE, BUT THEY ARE A CONSUMABLE ITEM THEY WILL NOT LAST INDEFINITELY
" CHANGE SLEEVE WHEN ABRASIVE BECOMES BLUNT " WHEN THE ABRASIVE BECOMES BLUNT, THE SURFACE TEMPERATURE RISES CONSIDERABLY. HIGH TEMPERATURES SIGNIFICANTLY REDUCE THE LIFE OF THE WHEEL. 'UNDER NO CIRCUMSTANCES SHOULD THE WHEEL BE RUN WITHOUT A SLEEVE. * DO NOT LEAVE SLEEVE ON WHEEL WHEN NOT IN USE - THE CONSTANT COMPRESSION WILL CAUSE RAPID DETERIORATION OF THE WHEEL. IDEAL OPERATING SPEED 3000 RPM MAXIMUM OPERATING SPEED 4800 RPM AVAILABLE IN HIGH (HARD) AND LOW (SOFT) DENSITY RUBBER SLEEVES IN PACKS OF 5 ARE AVAILABLE IN 40# 60# 120# 180# 240# 320# AND ULTRA FINE GRIT CHANGING THE SLEEVE IS EASY IF THE RUBBER WHEEL IS SUPPORTED BY A JAR OR A SIMILAR ITEM JUST A LITTLE SMALLER IN DIAMETER THAN THE WHEEL ITSELF THE WHEEL CAN BE RUN ON BENCH GRINDERS WITH TAPER ATTACHMENTS OR SPEED CONTROLLED BARREL GRINDERS
EASE SLEEVE ON AND OFF WHEEL CAREFULLY WHILST SUPPORTING THE RUBBER |
|
Copyright © 2005 SCOUR PADS ( AUST) PTY LTD
|
IN
USE THE WHEEL FLATTENS OUT TO IMPART A LONG EVEN SCRATCH PATTERN.