DISTRIBUTORS OF

SAINT GOBAIN ABRASIVES

CARBORUNDUM & NORTON ABRASIVES

POLY PTX POLISHING SYSTEMS

SHINANO INDUSTRIAL AIR TOOLS

SWISS ABRASIVES ( SIA ). SUHNER. KINIK. VSM. PFERD.

CUSTOM BUILT GRINDING WHEELS

SANDING & LINISHING BELTS

ROLLS - SHEETS - NON WOVEN ABRASIVES

METAL POLISHING EQUIPMENT & POLISHES

ARBOGA & SCANTOOL LINISHING MACHINES

MANUFACTURERS OF

HANDEEZ INDUSTRIAL SCOURING PADS

EZELAP LAPPING COMPOUNDS

EZEGRIND VALVE GRINDING COMPOUNDS

RED-I-BUFF METAL SANITISING WHEELS

RED-I-BUFF PROFILE SANDING WHEELS

RED-I-BUFF POLISHING BUFFS & MOPS

FLOGGER LOADINGS

SPIRAL BANDS

PROFILE SANDING MACHINE

WE PRODUCE A RANGE OF PROFILE SANDING MACHINE FOR THE FURNITURE AND WOOD WORKING INDUSTRIES

A LARGE SAFETY STOP SWITCH IS FITTED TOGETHER WITH AN S&S PUSH BUTTON STOP START SWITCH (TO WHICH THERMAL OVERLOAD PROTECTION HAS BEEN FITTED).

THE STAND HAS A 90 DEGREE SWIVEL ADJUSTMENT WHICH ENABLES THE DRIVE UNIT TO BE SWIVELLED FROM THE VERTICAL POSITION THROUGH TO A HORIZONTAL OPERATING POSITION. HEIGHT ADJUSTMENT APPROX 100mm.

A LARGE SAFETY STOP SWITCH IS FITTED TOGETHER WITH AN S&S PUSH BUTTON STOP PROTECTION HAS BEEN FITTED)

SHPPING WEIGHT APPROX 110KGS . APPROX SIZE :-

L 1000mm W 540mm H 840 mm

MODEL VS SANDING MACHINE

THIS ROBUST 3 PHASE HEAVY DUTY SANDING MACHINE IS USE FOR SANDING PROFILES ON FURNITURE COMPONENTS

MODEL VS SANDING MACHINE

THE DRIVE UNIT CONSISTS OF A STAND MOUNTED HEAVY DUTY VARIABLE SPEED DRIVE UNIT - EQUIPPED WITH A 1.5 KW 3 PHASE ELECTRIC MOTOR. THE OUTPUT SPEED MAY BE VARIED THROUGH THE CUP AND CONE VARIATOR FROM 400 RPM THROUGH TO 1600 RPM.

THE UNIT COMES COMPLETE WITH THE MODEL 8P4 BRUSH BACK SANDER HEAD - FITTED WITH A SET OF 320# SLASHED LOADINGS.

PLEASE NOTE :

THE FOLLOWING ITEMS ARE NOT SUPPLIED WITH THE SANDER DRIVE UNIT.

1. THERE IS NO TOP FITTED TO THE STAND. TOPS ARE USUALLY MADE FROM MDF AND FITTED ON SITE TO SUIT THE PURCHASERS OWN PARTICULAR REQUIREMENT.

2. GUARDS AND DUST EXTRACTION COLLECTOR HEADS. AS WILL BE APPRECIATED,

THESE UNITS ARE USED TO SAND MANY DIFFERENT TYPES AND SIZES OF COMPONENTS AND AS SUCH, THE ABOVE MENTIONED ITEMS WILL NEED TO BE SET UP ON SITE TO SUIT EACH SPECIFIC APPLICATION BEARING IN MIND THAT THE GUARDS AND COLLECTORS MUST BE FITTED INTO EXISTING DUST EXTRACTION DUCTS & UNITS.

IT IS ESSENTIAL THAT THESE ITEMS BE FITTED ..IT IS ALSO ESSENTIAL THAT THESE ITEMS WHEN FITTED COMPLY WITH ALL RELEVANT REGULATIONS PARTICULARLY THOSE OF WORKSAFE AUSTRALIA.

THE DRIVE UNIT IS MOUNTED ON A SWIVEL BASE ALLOWING IT TO BE USED IN A VERTICAL OR HORIZONTAL POSITION. A LARGE BEARING IS FITTED AT THE FRONT TO TAKE THE THE LOAD IMPOSED DURING SANDING.

HEIGHT IS ADJUSTED BY MEANS OF A HAND WHEEL. THE UNIT CAN BE FIXED TO A WALL OR A STAND.

THE CONTROL UNIT CAN BE PROGRAMMED VIA THE QUICK TOUCH BUTTONS. SPEED READ OUT IS CONSTANTLY DISPLAYED ON THE FACE OF THE CONTROL UNIT.

THE NEW MODEL VSI VARIABLE SPEED SANDING MACHINE USES SOPHISTICATED INVERTER CONTROL TO VARY THE OUTPUT SPEED OF THE DRIVE UNIT.SINGLE PHASE INPUT IS CONVERTED TO 3 PHASE OUTPUT

TO POWER THE 1.5 kW - 3 PHASE MOTOR

The use of leading edge technology guarantees reliability and optimum performance speed is controlled by a conveniently placed dial.

The motor is fitted with an additional fan providing a constant stream of cooling air when the motor is being run at low speed

[ Home ] [ Up ] [ Product Groups ] [ Product List ] [ Contents ] [ Feedback ] [ Safety ] [ What's New ] [ Search ] [ Lapping Compounds ] [ Product Groups ]

PROFILE SANDING MACHINE

Copyright © 2005 SCOUR PADS ( AUST) PTY LTD